TechDataPS

PRODUCT

DGX-O-DXL-4K
AMX

The DGX-O-DXL-4K is a 4K and Ultra High Definition (UHD) capable and HDCP compliant twisted pair cable output board for the Enova DGX 800, Enova DGX 1600, Enova DGX 3200, and Enova DGX 6400 Digital Media Enclosures. It has four connections per board designed to transmit audio and video to DXLink Twisted Pair Receivers while passing bi-directional control and Ethernet signals over one shielded Cat6A or Cat7 standard twisted pair cable up to 70 m. DXLink Power is available from the DXLink Output Board to power DXLink Twisted Pair Receivers.

FEATURES  

  • 4K and Ultra High Definition (UHD) Support – Experience high-quality video resolution for 4K devices
  • Only One Cable – Send audio and video while passing control, Ethernet and power over one twisted pair cable
  • Send HDMI signals up to 70 meters – Extend the reach of the HDMI with HDCP signals far beyond the capabilities of typical HDMI cabling
  • Standard Twisted Pair Cable – Save time and effort in installation by leveraging pre-existing cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
  • Hot Swappable – Easily add or replace I/O boards at any time after deployment - the system automatically recognizes the new configuration and activates the boards
  • HDCP Compliant

SPECIFICATIONS

  • Compatible Formats: HDMI Video, Audio, Ethernet, USB (HID), Power, Serial Control and IR Control
  • Signal Type Support: DXLink Twisted Pair
  • Connectors: (4) RJ-45 Ports
  • Progressive Resolution Support:
    • 480p up to 4096 x 2160p, 60 Hz* (*Y/Cb/Cr 4:2:0, with 4K RX Scaler in Bypass mode)
    • NOTE: See full list of supported formats in “DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual”.
  • 4K Resolution Support:
    • 3840 x 2160p @ 24/25/30 Hz
    • 4096 x 2160p @ 24/25/30 Hz
    • 3840 x 2160p @ 60 Hz, 4:2:0*
    • 4096 x 2160p @ 60 Hz, 4:2:0*
    • Supported by DX-RX-4K when in Bypass Scaling mode
    • NOTE: See full list of supported formats in “DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual”.
  • Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM (Dolby Digital and DTS support up to 48 kHz, 5.1 channels)
  • Compatible AMX Products:
    • Must be used in conjunction with an Enova DGX 800, 1600, 3200 or 6400 Digital Media Enclosure and a DXLink Twisted Pair Transmitter.
    • Compatible with all AMX 4K DXLink Twisted Pair Receivers including 4K HDMI Receiver Module. Also compatible with (non 4K) DXLink Twisted Pair Receivers including DXLink HDMI Receiver Module.
    • For passage of 4K signal content, DXLink Twisted Pair 4K Boards must be used in conjunction with DXLink Twisted Pair 4K Transmitters and Receivers.
    • Additional compatibility is available between DXLink Twisted Pair 4K equipment and DXLink Twisted Pair (non-4K) equipment (see the “DXLink Compatibility” Appendix in the “DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual” at www.amx.com).
    • Recommended Accessories:
      • DXLink 4K HDMI Receiver Module (FG1010-510)
      • DXLink 4K HDMI Decor Style Wallplate Transmitters (US) (FG1010-330-BL/WH)

Comprehensive specifications for this product are available in the DGX-O-DXL-4K Enova DGX DXLink Twisted Pair Output Board datasheet.

<개인정보처리방침>