The DGX-I-HDMI-4K is a 4K and Ultra High Definition (UHD) capable and HDCP compliant HDMI input board for the Enova DGX 800, Enova DGX 1600, Enova DGX 3200, and Enova DGX 6400. It has four connections and supports HDMI with embedded audio, DisplayPort++ or DVI signals.
4K and Ultra High Definition (UHD) Support – Experience
high-quality video resolution for 4K devices
InstaGate Pro® Technology – Easily integrate
HDMI/HDCP into system designs and enjoy hassle-free matrix switching to all
compliant displays. No tools, no delays, and no key constraints – it just
works
Hot Swappable – Easily add or replace I/O boards at any
time after deployment - the system automatically recognizes the new
configuration and activates the boards
3D Support – Pass through latest video formats including 3D
and Deep Color
Surround Sound Support – Dolby TrueHD, Dolby Digital,
DTS-HD Master Audio, DTS, and 2-channel through 8-channel L-PCM
SPECIFICATIONS
GENERAL
Compatible AMX Products: Must be used in conjunction with an Enova DGX 800,
1600, 3200 or 6400 Digital Media Enclosure
Regulatory Compliance: See Enova DGX Digital Media Switcher Enclosure for
regulatory compliance
DisplayPort ++ (Input Only, With HDMI Cable Adapter)
Connectors: 4 HDMI Type A Female Ports
Video Data Rate (Max): 8.91 Gbps (max)
Video Pixel Clock (Max): 297 MHz
Progressive Resolution Support: 480p up to 4096x2160p,60 Hz (Y/Cb/Cr 4:2:0
& 4K RX Scaler in Bypass)
Interlaced Resolution Support: 480i, 576i, 1080i (NOTE: If input is
interlaced, all scaled outputs will deinterlace video to a progressive
resolution format. If in scaler Bypass mode interlaced input will pass through
unaltered.)
4K Resolution Support: 3840x2160p@24/25/30 Hz, 4096x2160p@24/25/30 Hz,
3840x2160p@60 Hz, 4:2:0*, 4096x2160p@60 Hz, 4:2:0 (NOTE: Supported by DX-RX-4K
when in Bypass Scaling mode.)
HDMI Cable Requirement: HDMI High Speed Cable, Category 2, Required
Input Equalization: Yes, adaptive to 21 ft. (7 m) (Cable distance support
dependent on cable quality and signal format.)
Input Re-clocking (CDR): Yes
Deep Color Support:
24-bit, 30-bit, 36-bit
30-bit and 36-bit are only supported when the HDMI Output Board or DXLink RX
Scaler is in Bypass mode and format is 1080p60 or less.
Color Space Support:
RGB 4:4:4
YCbCr 4:4:4, 4:2:2, and 4:2:0
Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is
converted to RGB 4:4:4
4:2:0 only supported at 2160p 50/60 Hz with 4K RX Scaler in
Bypass
3D Format Support:
Frame Packing 1080p up to 24 Hz
Frame Packing 720p up to 50/60 Hz
Frame Packing 1080i up to 50/60 Hz
Top-Bottom 1080p up to 24 Hz
Top-Bottom 720p up to 50/60 Hz
Side-by-Side Half 1080i up to 50/60 Hz
NOTE: The Scaler on corresponding output board or RX must be set to
Bypass mode.