DGX-O-DXL
AMX

The DGX-O-DXL is a HDCP compliant twisted pair cable output board for the Enova DGX 8, 16, 32 and 64 Digital Media Enclosures. It has four connections per DXLink Output Board and is designed to transmit audio and video to DXLink Twisted Pair Receivers while passing bi-directional control and Ethernet over one standard twisted pair cable up to 100m. DXLink Power is available from the DXLink Output Board to power DXLink Twisted Pair Receivers.

FEATURES  

  • Only One Cable – Send audio and video while passing control, Ethernet and power over one twisted pair cable
  • Send HDMI signals up to 100 meters – Extend the reach of the HDMI with HDCP signals far beyond the capabilities of typical HDMI cabling
  • Standard Twisted Pair Cable – Save time and effort in installation by leveraging pre-existing cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
  • Hot Swappable – Easily add or replace I/O boards at any time after deployment - the system automatically recognizes the new configuration and activates the boards
  • HDCP Compliant

SPECIFICATIONS

GENERAL

 

  • Compatible Formats: Must be used in conjunction with an Enova DGX 8, 16, 32 or 64 Digital Media Enclosure and a DXLink Twisted Pair Receiver
  • Recommended Accessories: DX-RX, DXLink HDMI Receiver Module (FG1010-500)

 

USB (HID):
Use the Enova DGX Digital Media Switcher in conjunction with DXLink Transmitters and Receivers (twisted pair and/or fiber), connect a DXLink Transmitter to a PC and a DXLink Receiver to a keyboard and mouse, the system then emulates commands from the receiver back to the PC.

For a list of HID devices which have been tested and found to be working well with the latest firmware please view the document “DXLink HID Keyboard and Mouse Supported Devices”.

SIGNAL TRANSPORT – DXLink w/HDCP:

 

  • Compatible Formats: HDMI Video / Audio / Ethernet / USB (HID) / Power and Control
  • Signal Type Support: DXLink Twisted Pair
  • DXLink Power:
    • The DXLink Twisted Pair Output Board provides Power over DXLink
    • DXLink Twisted Pair Receiver can have power supplied over twisted pair cable when connected to a DXLink Output board of the Enova DGX Digital Media Switcher
    • DXLink Receiver Modules can be powered via DXLink Power or desktop power supply (ENERGY STAR® qualified) with power cord
    • Approved Power over DXLink sourcing devices for DXLink Twisted Pair Receiver include:
      • Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Output Board installed)
      • Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD, 2155HD, 3150HD and 2150HD)
      • PS-POE-AT-TC High Power PoE Injector
      • PDXL-2 Power over DXLink Controller
    • Use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of a configuration and whether any of the DXLink Transmitters or Receivers should be powered with the local power supply. The configuration tool contains instructions on how to determine power requirements.
  • Connectors: (4) RJ-45 Ports
  • Transport Layer Throughput (Max): 10.2 Gbps
  • Twisted Pair Cable Type:
    • Shielded Cat6, Cat6A and Cat7
    • DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference.
    • For more details and helpful cabling information, reference the white paper titled "Cabling for Success with DXLink", or contact your AMX representative
  • Twisted Pair Cable Length: Up to 328 ft (100 m)
  • Video Data Rate (Max):
    • 4.95 Gbps / 6.75 Gbps
    • 6.75 Gbps supported when the HDMI Output Board Scaler or DXLink HDMI Rx Scaler is in Bypass mode and format is 1080p60 or less
  • Video Pixel Clock (Max):
    • 165 MHz / 225 MHz
    • 225 MHz supported when the HDMI Output Board Scaler or DXLink HDMI Rx Scaler is in Bypass mode and format is 1080p60 or less
  • Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz
  • Deep Color Support:
    • 24-bit, 30-bit, 36-bit
    • 30-bit, 36-bit supported when the HDMI Output Board Scaler or DXLink HDMI Rx Scaler is in Bypass mode and format is 1080p60 or less
  • Color Space Support:
    • RGB 4:4:4
    • YCbCr 4:4:4 and 4:2:2
    • Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
  • 3D Format Support:
    • Yes (HDMI Primary Formats, when used with DXLink Output Boards and the DXLink HDMI RX Scaler is in bypass mode)
      • Frame Packing 1080p up to 24 Hz
      • Frame Packing 720p up to 50/60 Hz
      • Frame Packing 1080i up to 50/60 Hz
      • Top-Bottom 1080p up to 24 Hz
      • Top-Bottom 720p up to 50/60 Hz
  • Audio Format Support:
    • Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM
    • Dolby Digital and DTS support up to 48 kHz, 5.1 channels
  • Audio Resolution: 16 bit to 24 bit
  • Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
  • Local Audio Support: Yes, Insertion and/or Extraction of 2 CH L-PCM selectable by channel when used in conjunction with Enova DGX Audio Insert / Extract Board
  • HDCP Support:
    • Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM
    • Dolby Digital and DTS support up to 48 kHz, 5.1 channels
  • Yes, full matrix HDCP support (includes any input to any or all outputs)
    • Key Management System
    • AMX HDCP InstaGate Pro Technology
    • Key support up to 16 devices per output, independent of source device
  • CEC Support: None
  • ICSP, TCP/IP, USB, IR, Control Management: Control distribution is managed by the Enova DGX 16/32 Digital Media Switcher on-board NetLinx Master and Ethernet Switch
  • Approvals: CE, FCC Class A, UL, cUL, RoHS / WEEE compliant
<개인정보처리방침>