TechDataPS

PRODUCT

DGX-I-DXL-4K
AMX

The DGX-I-DXL-4K is a 4K and Ultra High Definition (UHD) capable and HDCP compliant twisted pair cable input board for the Enova DGX 800, Enova DGX 1600, Enova DGX 3200, and Enova DGX 6400 Digital Media Enclosures. It has four connections per board designed to receive audio and video from DXLink Twisted Pair Transmitters while passing bi-directional control and Ethernet signals over one shielded Cat6A or Cat7 standard twisted pair cable up to 70m. DXLink Power is available from the DXLink Input Board to power DXLink Twisted Pair Transmitters.

FEATURES  

  • 4K and Ultra High Definition (UHD) Support – Experience high-quality video resolution for 4K devices
  • Only One Cable – Receive audio and video while passing control, Ethernet and power over one twisted pair cable
  • Send HDMI signals up to 70 Meters – Extend the reach of the HDMI with HDCP signals far beyond the capabilities of typical HDMI cabling
  • Standard Twisted Pair Cable – Save time and effort in installation by leveraging pre-existing cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
  • Hot Swappable – Easily add or replace I/O boards at any time after deployment - the system automatically recognizes the new configuration and activates the boards
  • HDCP Compliant

SPECIFICATIONS

  • Compatible Formats: HDMI Video, Audio, Ethernet, USB (HID), Power, Serial Control and IR Control
  • Signal Type Support: DXLink Twisted Pair
  • Connectors: (4) RJ-45 Ports
  • Progressive Resolution Support:
    • 480p up to 4096 x 2160p, 60 Hz* (*Y/Cb/Cr 4:2:0, with 4K RX Scaler in Bypass mode)
    • NOTE: See full list of supported formats in “DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual”.
  • Interlaced Resolution Support:
    • 480i, 576i, 1080i
    • If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode, interlaced input will pass through unaltered.
  • 4K Resolution Support:
    • 3840 x 2160p @ 24/25/30 Hz
    • 4096 x 2160p @ 24/25/30 Hz
    • 3840 x 2160p @ 60 Hz, 4:2:0*
    • 4096 x 2160p @ 60 Hz, 4:2:0*
    • Supported by DX-RX-4K when in Bypass Scaling mode
    • NOTE: See full list of supported formats in “DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual”.
  • Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM (Dolby Digital and DTS support up to 48 kHz, 5.1 channels)
  • Compatible AMX Products:
    • Must be used in conjunction with an Enova DGX 800, 1600, 3200 or 6400 Digital Media Enclosure and a DXLink Twisted Pair Transmitter.
    • Compatible with all AMX 4K DXLink Twisted Pair Transmitters including 4K HDMI Decor Style Wallplate, 4K Solecis Digital Switchers (including 4x1, 5x1 and 8x1). Also compatible with (non 4K) DXLink Twisted Pair Transmitters including HDMI Transmitter Module, Multi-Format Decor Style Wallplate, and Multi-Format Wallplate, and Solecis Digital Switchers (including 4x1, 5x1 and 8x1).
    • For passage of 4K signal content, DXLink Twisted Pair 4K Boards must be used in conjunction with DXLink Twisted Pair 4K Transmitters and Receivers.
    • Additional compatibility is available between DXLink Twisted Pair 4K equipment and DXLink Twisted Pair (non-4K) equipment (see the “DXLink Compatibility” Appendix in the “DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual” at www.amx.com).
    • Recommended Accessories:
      • DXLink 4K HDMI Receiver Module (FG1010-510)
      • DXLink 4K HDMI Decor Style Wallplate Transmitters (US) (FG1010-330-BL/WH)
      • SDX-414-DX, 4x1 4K HDMI Digital Switcher with DXLink Output (FG1010-314)
      • SDX-514M-DX, 5x1 4K Multi-Format Digital Switcher with DXLink Output (FG1010-355)
      • SDX-814-DX, 8x1 4K HDMI Digital Switcher with DXLink Output (FG1010-318)

Comprehensive specifications for this product are available in the DGX-I-DXL-4K Enova DGX DXLink Twisted Pair 4K Input Board datasheet.

<개인정보처리방침>