TechDataPS

PRODUCT

Control 88M
JBL

Mushroom-type Outdoor Landscape Speakers
Control 80 Mushroom-type landscape 스피커들은 호텔, 레스토랑, 쇼핑센터와 같은 야외 공간의 바닥 위 혹은 안에서 하이파이 성능을 자랑합니다.
넓은 주파수 대역과 360도의 가로범위 커버는 야외 장소에 최상의 음질과 정확한 정보 전달을 가능케 합니다.
선 연결 입구는 물이 들어 갈 수 없도록 눌림쇠 너트로 스피커의 여러 부분에 장착되어 바닥에 부착됩니다.
이중 공간 밀폐를 하여 선 연결과 전기장치들을 한번 더 보호하여 장기간 믿고 사용하실 수 있습니다.
인클로져 케이스까지 도포된 색은 야외 사용시 발생할 수 있는 스크래치 등으로 부터 겉면을 최대한 보호합니다.

  • Components:
    • 8” highly weather-resistant driver
    • 1” soft-dome highly weather-resistant tweeter
  • 120W Pink Noise Power Handling (240W program) in direct 8Ώ setting, plus built-in 60W 70V/100V multi-tap transformer
  • Tough polyethylene highly weather resistant enclosure
  • Fully isolated center chamber for wiring protection
  • High fidelity sound character with broad frequency range of 47Hz - 16kHz
    • SPECIFICATIONS

    .indexStyle1 {font-size: 15px;color: #757575;} .indexStyle2 {font-size: 15px;font-weight: bold;} .indexStyle3 {font-size: 12px;color: #757575;}
    Frequency Response (-10dB) 47 Hz – 16 kHz
    Power Rating 240 W Continuous Program (2 hrs)
    120W (480W peak), Continuous Pink Noise (2 hrs)
    100W (400W peak) Continuous Pink Noise (100 hrs)
    Transformer Taps 70V: 60W, 30W, 15W & 7.5W
    100V: 60W, 30W, 15W
    Frequency Response (±3 dB) 60Hz - 15 kHz
    Maximum Input Voltage 28.0 V
    Sensitivity 87 dB, 1W @ 1m (ave. 80Hz - 16kHz)
    Nominal Coverage Angle 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
    Directivity (Q) 2.1
    Directivity Index (DI) 3.2 dB
    Rated Maximum SPL 108 dB @ 1m
    Nominal Impedance 8Ω (at 8Ω setting)
    Minimum Impedance 6.6Ω at 9.5kHz
    Insertion Loss <0.5 dB at any tap setting
    Thru Setting 8Ω nominal
    Crossover Type 2nd Order LPF on LF and 2nd Order HPF on HF
    Recommended Protective High-Pass 45 Hz for 8Ω operation, 24 dB/oct
    80 Hz for 60W tap, 24 dB/oct
    50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
    Low Frequency Driver 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
    High Frequency 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.
    Enclosure Material LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
    Grille Powder coated stainless steel.
    Environmental IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
    Agency Ratings UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
    Terminals Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
    Wiring Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).
    Colors Hunter Green, RAL6018
    Dimensions (H x W x D) 524 x 355 x 355 mm (20.7 x 14 x 14 in.)
    Net Weight 7.8 kg (17 lb)
    Shipping Weight 10.5 kg (23 lb)
    Included Accessories (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
    Installer-Supplied Required Tools 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
    <개인정보처리방침>