컨트롤 컨트랙터 40 시리즈는 프리미엄, 인-실링 특화 스피커로서 뛰어난 패턴 컨트롤과 지속적인 커버리지로 우수한 음향성능을 발휘합니다. JBL의 버텍 시리즈 라인어레이 스피커에서 가져온 독점기술, Conical Radiation Boundary Integrator® (RBI™) 기술을 채택한 컨트롤 40시리즈는 모두 5개의 모델이 있습니다. Control 47C/T는 120도의 넓은 커버리지로 적은 숫자의 스피커로 보다 넓은 영역을 커버하며, 확장된 베이스 성능을 가지고 있습니다. Control 47LP는 눈에 잘 띄지 않는 디자인으로 천정이 낮은 경우 사용할 수 있습니다. Control 47HC는 높은 실링을 위한 좁은 커버리지를 가지고 있습니다. Control 40 CS/T는 서브우퍼로서 내장 크로스오버가 포함되어 있고, Control 42C는 초소형 인-실링 위성 스피커입니다. JBL의 60년 역사를 바탕으로 개발된 이 시리즈는 우아한 디자인의 스피커 안에 뛰어난 성능과 안정정을 고루 갖춘 제품입니다.
Frequency Range (-10 dB) | 55 Hz – 20 kHz | |
Frequency Response (+/-3 dB) | 80 Hz – 17 kHz | |
Power Capacity | 150 Watts Continuous Program Power 75 Watts Continuous Pink Noise | |
Nominal Sensitivity (2.83V/1m) | 88 dB | |
Nominal Coverage Angle | 120° conical coverage | |
Directivity Factor (Q) | 5.6 | |
Directivity Index (DI) | 7.3 dB | |
Rated Maximum SPL | 107 dB @ 1 m (3.3 ft) average, 113 dB peak | |
Rated Impedance | 8 ohms (in bypass mode) | |
Transformer Taps | 60W, 30W, 15W, (& 7.5W @ 70V) | |
Transformer Insertion Loss | 0.76 dB @ 60W, 0.70 dB @ 30W, 0.61 dB @ 15W, 0.58 dB @ 7.5W | |
LF Driver | 130 mm (5.25 in) polypropylene-coated paper cone with butyl rubber surround, 25 mm (1 in) copper voice coil, vented fiberglass resin voice coil former. | |
HF Driver | 20 mm (0.75 in) soft-dome, neodymium magnet assembly, ferro-fluid cooling, aluminum voice coil former. | |
Input Connectors | Two removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm). Key: 1) + in, 2) - in, A)+ loop thru, B) - loop thru | |
Knockouts | Two (top, and side) | |
Safety Agency | Suitable for use in air handling spaces per UL1480 Speakers for Fire Alarm, Emergency and Commercial and Professional Use, complies with UL-2043 Fire Tests for Heat and Visible Smoke Release for Discrete Products, CUL, NFPA-70, NFPA- 90A Installation of Air Conditioning and Ventilation Systems. In accordance with the requirements of IEC60849/EN60849. | |
Dimensions | 250 mm (9.9 in) diameter, 239 mm (9.4 in) mounting depth | |
Cutout Size | 220 mm (8.75 in) | |
Ceiling Thickness Range | Accommodates tiles / drywall up to 70 mm (2.75 in) thick | |
Net Weight | 3.9 kg (8.6 lb) | |
Shipping Weight | 8.6 kg (19.0 lb), pair pack | |
Included Accessories | C-ring support backing plate, 2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles), press-in grille, knockout strain relief, cutout template, paint shield, 2 removable locking multi-pin connectors. | |
Optional Accessories | MTC-26NC New Construction Bracket MTC-26MR Mud Ring Construction Bracket |