Components |
Eight 50 mm(2 in) Full-Range |
Frequency Range (-10 dB) |
120 Hz – 20 kHz |
Coverage Pattern |
Vertical 20° (1.5 kHz - 16 kHz, ±10°)Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°) |
Sensitivity (2.83V@ 1m) |
93 dB (speech mode, 2 kHz - 14 kHz)89 dB (music mode, 300 Hz - 18 kHz) |
Nominal Impedance |
8 ohms |
Power Capacity (8 ohm setting) |
150W (600W peak), 2 hrs100 W (400W peak), 100 hrs |
Max SPL |
Speech mode: 115 dB cont ave (121 peak)Music mode: 111 dB cont ave (117 peak) |
70V/100V Transformer Taps |
60W, 30W, 15W, (7.5W at 70V only), and 8Ω thru, via switch |
Enclosure |
Fiberglass reinforced ABS cabinet, painted aluminum grille |
Outdoor Capability |
IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant. |
Colors |
Black or White (-WH) |
Insert Points |
Ten M6 insert points on back panel. |
Mounting |
Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension. |
Safety Agency Rating |
EN54-24:2008 certified (Certificate No. 0359-CPR-00238), when installed with MTC-PC2 terminal panel cover. In accordance with the requirements of IEC60849/EN60849. |
Dimensions (H x W x D) |
528 x 99 x 153 mm(20.8 x 3.9 x 6.0 in) |
Net Weight |
4.1 kg (9.0 lb) |
Included Accessories |
Swivel (pan) / tilt wall bracketMTC-PC2 terminal panel cover |
Optional Accessories |
MTC-CBT-FM1 flush-mount low-profile wall-mount bracket MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand |