The JBL Intellivox ADC (Analogue Directivity Control) Mark II range is intended for use in 70V/100V Public Address and Voice Alarm (PA/VA) systems. As with other Intellivox products the ADC range has been designed to maximise listening comfort and provide highly intelligible speech reproduction even within difficult reverberant spaces.
ACOUSTICAL | |
Frequency Range | 260 - 11k Hz (+/-3dB) |
150 - 14k Hz (-10 dB) | |
Sensitivity (1 W / 4 m) | 79 dBSPL |
Maximum SPL (100 W / 4 m) | 99 dBSPL |
Coverage | |
- Horizontal | 40º (-6 dB) |
- Vertical | 130º (-6 dB) |
- Steering Angle | Horizontal 0º |
- Typical Throw | 15 m |
ELECTRICAL | |
Rated Impedance | |
- 100 W tap | 100 Ω |
- 50 W tap | 200 Ω |
- 25 W tap | 400 Ω |
Rated Noise Power | 100 Wrms(100 W tap) |
Rated Noise Voltage | 100 Vrms |
Control switches | |
- Tap setting | 100 W / 50 W / 25 W |
- Highpass filter | HPF active / Flat |
- Correction EQ | EQ active / Flat |
Pilot tone detection | |
- Indicator | Green LED on front |
- Frequency range | 20k - 23k Hz |
- Minimum level | 6 Vrms |
Suggested amplifiers | JBL 100 V IndustryAmp series |
MECHANICAL | |
Material | Steel, powder coated |
Mounting points | 4 x M5 left and 4 x M5 right |
Dimensions (H x W x D) | 134 x 865 x 92 mm (5.3” x 34.1” x 3.6”) |
Standard Colours** | |
- Enclosure and grill | RAL 9007 (grey) or RAL 9010 (white) |
- Speaker baffle | RAL 9011 (black) |
Weight | 10 kg (22 lbs) |