KVS1000
Crown

Two-channel, 1450W @ 4Ω

오디오 믹서로부터 전달된 음향 신호를 스피커에서 출력 될 수 있도록 소리를 증폭하는 기기로서 높은 전력을 만들어내는 정교한 엔지니어링 제품입니다.

간단하고 안정적인 디자인

견고한 철제 2U 섀시에 장착

효율적인 팬으로 과도한 열 축적 방지

 Balanced XLR 입력, 터치 방지 바인딩 포스트, SPEAKON 출력

 

레벨 컨트롤, 전원 스위치, LED 상태표시창

 


performance

Frequency response

20Hz-20 kHz, + 0 / -1dB

Total harmonic distortion (THD)

<0.5%, 20Hz-20kHz

Intermodulation distortion

= / <0.35%

Conversion Rate

> 10V / us

Voltage gain

36dB

Signal to noise ratio (20 Hz-20 kHz below rated power, A-weighted sound level) > 100dB
Damping factor > 200 (8Ω, 10Hz-400Hz)
Crosstalk

-75dB @ 1kHz, -59dB @ 20kHz, based on rated output power

Input sensitivity

0.775V or 1.4V (rated power 8Ω)

input resistance

20kΩ

Input connector

One balanced XLR connector per channel

Output connector

One 4-pin Speakon ® connector and one pair of posts per channel

Front panel components

Power switch, channel gain control knob

Rear panel components

Output mode switch: stereo, parallel, bridge; sensitivity switch: 0.775V, 1.4V

Power Indicator

Blue-green bicolor LED

Signal Indicator

One green LED per channel

Clip Indicator

One yellow LED per channel

Fault Indicator

One red LED for each channel, indicating that the channel is off

Power cables

Power plug: 10A, 250V; power cord: CCC 3x1.5mm 2

protection

Protection circuit against short circuit, no load, switch noise, radio interference

Ventilation

Backward air convection mechanism

Cooling

Internal air exhaust cooling, fan cooling, fast adjustment, temperature protection

Dimensions (W × H × D)

19 ”x 3.5” x 15.6 ”(482 mm x 89 mm x 395 mm)

Net Weight

21.5 lb (9.7 kg)

Shipping weight

25.7 lb (11.7 kg)

<개인정보처리방침>